Safety Solutions at Height
Our expertise
TravailEnHauteur carries out the study, installation and maintenance of horizontal and vertical lifelines to secure your work at height in full compliance with the EN 795 standard.
Each installation is sized according to your site configuration, the number of users and how often work is carried out. We hand over a complete technical file with drawings, certificates and a compliance report.
Our Fall Arrest Systems
Services
Complete height protection solutions certified to European standards
Horizontal Lifelines
Safe movement systems on rooftops, walkways and cable trays
Vertical Lifelines
Securing climbs and descents on ladders, pylons and vertical structures
EN 795 Anchor Points
Certified permanent anchors for flat roofs, pitched roofs and facades
Industrial Structures
Fall arrest solutions for factories, silos, steel frames and warehouses
Audit & Inspection
Mandatory periodic inspection, compliance report and certification
Annual Maintenance
Preventive maintenance contracts to guarantee compliance and safety
Fields of Intervention
Sectors
We work on all types of buildings and structures
Commercial Buildings
Offices, towers, shopping centres and residential buildings
Industry
Factories, workshops, logistics warehouses, industrial zones
Energy & Utilities
High-voltage pylons, antennas, tanks and infrastructure
Construction Sites
Permanent and temporary securing of building sites
Agriculture
Silos, farm sheds, greenhouses and rural structures
Tourism & Hospitality
Hotel rooftops, resorts, clubs and tourist complexes
Lifeline: price and cost factors
Budget
There is no per-metre price for a lifeline: each installation is sized for a specific site. The quote is drawn up after the technical audit, and its amount depends on a small number of parameters you can anticipate.
To compare two proposals, check that they cover the same scope: EN 795 certified anchors, load tests, technical file and user training are part of the installation, not options.
Length and configuration
Horizontal line, vertical line or a combination of both; number of direction changes and intermediate points.
Number of anchors
Determined by the span between supports and the number of simultaneous users.
Type of support
Concrete, steel frame, steel deck or flat roof: each support dictates its own fixing method.
Load tests and file
On-site tests, layout drawings, compliance certificates and user training.
Annual maintenance
Mandatory periodic inspection, to be included in the operating budget.
When is a lifeline mandatory?
Regulations
As soon as an employee works at height repeatedly on a roof, a facade or a technical structure, the employer must provide fall protection: this is one of the obligations set out in our guide to work-at-height regulations in Tunisia (in French). When collective protection (guardrails) is not possible, a permanent lifeline becomes the most reliable way to secure regular access: roof maintenance, servicing of technical equipment, facade cleaning, work on silos and steel frames.
The installation must then comply with the equipment standards: EN 795 anchors, EN 353 fall arresters, EN 361 harnesses, and a documented periodic inspection. The details of each standard and the inspection frequency are listed in our EN standards reference table (in French).
From the field


Our Process
Method
From the audit to handover of the compliance file
Site Audit
Technical visit, access analysis and identification of risk areas
Technical Study
System sizing, load calculation and choice of certified equipment
Detailed Quote
Priced proposal with layout drawings and technical specifications
Certified Installation
Installation by qualified rope access technicians with load tests and quality control
File Handover
Complete technical file, compliance certificates and user training
Frequently Asked Questions
FAQ
01Which standards do you follow for lifelines?
Our installations comply with EN 795 (anchor points), EN 353 (guided-type fall arresters), EN 354 (lanyards) and EN 360 (retractable fall arresters). Every installation comes with a complete technical file and certification.
02Do you work on rooftops and industrial structures?
Yes, we install fall arrest systems on flat and pitched roofs, steel frames, facades, pylons, silos and all technical structures. Our rope access technicians carry out the study, installation and load tests in full compliance.
03What is the difference between a horizontal and a vertical lifeline?
A horizontal lifeline lets you move safely along a surface (roof, cable tray) while staying attached. A vertical lifeline secures climbing and descending (ladder, pylon). We offer both systems depending on your configuration.
04Do you offer maintenance contracts for lifelines?
Yes, we offer annual maintenance contracts, which are mandatory for compliance. Each inspection includes: visual check of the anchors, load test, replacement of worn parts and a written report. Service life of a well-maintained installation: 15 to 20 years.
05Do you work throughout Tunisia?
Yes, our teams work across the whole country: Tunis, Sfax, Sousse, Hammamet, Monastir, Nabeul, Bizerte, Gabes and the industrial zones. We travel with our specialised equipment for fast and efficient interventions.
For details of the standards applicable to fall arrest equipment, see our EN standards reference table (in French): EN 795, EN 361, EN 353 and inspection frequency.
Discover our other services
Secure Your Access at Height
Horizontal lifeline, vertical lifeline or custom anchor system: our team designs and installs your EN 795 certified fall protection.
Available 24/7. Interventions throughout Tunisia.